Reassembly

LIGHTING: REAR COMBINATION LIGHT ASSEMBLY:

REASSEMBLY

HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.

1. INSTALL BACK-UP LIGHT BULB





(a) Install the bulb to the socket.
(b) Insert the bulb/socket unit into the combination light.
(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.
2. INSTALL REAR TURN SIGNAL LIGHT BULB





(a) Install the bulb to the socket.
(b) Insert the bulb/socket unit into the combination light.
(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.
3. INSTALL TAIL AND STOP LIGHT BULB





(a) Install the bulb to the socket.
(b) Insert the bulb/socket unit into the combination light.
(c) Turn the bulb/socket unit in the direction indicated by the arrow to install it.