Installation

VOLTAGE INVERTER (for CrewMax):

INSTALLATION

1. INSTALL VOLTAGE INVERTER ASSEMBLY






(a) Connect the voltage inverter connector.
(b) Install the voltage inverter with the 2 bolts.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH Installation

3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
4. INSTALL REAR DOOR SCUFF PLATE LH Installation

5. INSTALL BACK PANEL TRIM LH Installation

6. INSTALL BACK PANEL TRIM RH Installation