Installation

2UZ-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR:

INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR





(a) Install a new gasket and the sensor.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
(b) Connect the connector.
2. INSTALL AIR CLEANER HOSE ASSEMBLY (Installation)

3. ADD ENGINE COOLANT (Service and Repair)

4. INSPECT FOR ENGINE COOLANT LEAK (Testing and Inspection)

5. INSTALL THROTTLE BODY COVER SUB-ASSEMBLY (Installation)

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).