Installation

PARK ASSIST / MONITORING: CLEARANCE WARNING ECU:

INSTALLATION

HINT: A bolt without a torque specification is shown in the standard bolt chart (Standard Bolt - Specified Torque For Standard Bolts).

1. INSTALL CLEARANCE WARNING ECU





(a) Install the clearance warning ECU to the bracket with the 2 nuts.

- Avoid any impact to the clearance warning ECU.
- Do not drop the ECU. If it is dropped, replace it with a new one.

2. INSTALL CLEARANCE WARNING ECU WITH BRACKET





(a) Install the ECU with bracket with the nut and bolt.
(b) Connect the ECU connectors.
3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH (Installation)

4. INSTALL INSTRUMENT SIDE PANEL RH (Installation)

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).