Removal

AUDIO / VISUAL: STEERING PAD SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

NOTICE:
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.

2. REMOVE LOWER NO. 2 STEERING WHEEL COVER (Removal)

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER (Removal)

4. REMOVE STEERING PAD (Removal)





5. REMOVE STEERING PAD SWITCH ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 2 screws.
(c) Detach the 4 pins and remove the steering pad switch.