Removal
BRAKE CONTROL: YAW RATE AND DECELERATION SENSOR:
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).
2. REMOVE CENTER FRONT SEAT ASSEMBLY (for Center Seat) (Removal)
3. REMOVE CONSOLE BOX ASSEMBLY (for Separate Seat Type)
(a) Remove the console box (Removal).
4. REMOVE YAW RATE SENSOR
(a) Remove the 2 nuts (labeled A) and sensor.
(b) Disconnect the sensor connector (labeled B), and then detach the clamp (labeled C) from the sensor bracket.