Installation

BRAKE CONTROL: STEERING ANGLE SENSOR:

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR (Installation)

2. INSTALL SPIRAL CABLE SUB-ASSEMBLY (Installation)

3. INSTALL UPPER STEERING COLUMN COVER (Installation)

4. INSTALL LOWER STEERING COLUMN COVER (Installation)

5. ADJUST SPIRAL CABLE (Installation)

6. INSTALL STEERING WHEEL ASSEMBLY (Installation)

7. INSTALL STEERING PAD (Installation)

8. INSTALL LOWER NO. 3 STEERING WHEEL COVER (Installation)

9. INSTALL LOWER NO. 2 STEERING WHEEL COVER (Installation)

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

11. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light (Diagnosis System).