Installation

AIR CONDITIONING: PRESSURE SWITCH:

INSTALLATION





1. INSTALL PRESSURE SWITCH
(a) Sufficiently apply compressor oil to a new O-ring and the fitting surface of the pressure switch.
Compressor oil:
ND-OIL 8 or equivalent
(b) Install the O-ring on the pressure switch.
(c) Install the switch.
Torque: 10.8 Nm (110 kgf-cm, 8 ft-lbf)
(d) Connect the connector.
2. CHARGE REFRIGERANT (Service and Repair)

3. WARM UP ENGINE (Service and Repair)

4. CHECK FOR LEAKAGE OF REFRIGERANT (Service and Repair)