Connecting Rod Bearing

Connecting Rod
Thrust clearance
Standard 0.160 to 0.290 mm (0.00629 to 0.0114 in.)
Maximum 0.35 mm (0.0138 in.)

Connecting rod thickness
Standard 22.880 to 22.920 mm (0.901 to 0.902 in.)

Oil clearance
Standard 0.021 to 0.047 mm (0.000827 to 0.00185 in.)
Maximum 0.059 mm (0.00232 in.)

Bend
Maximum 0.05 mm (0.00197 in.) per 100 mm (3.94 in.)

Twist
Maximum 0.15 mm (0.00591 in.) per 100 mm (3.94 in.)

Connecting rod big end inside diameter
Mark 1 55.000 to less than 55.006 mm (2.1654 to less than 2.1656 in.)
Mark 2 55.006 to less than 55.012 mm (2.1656 to less than 2.1658 in.)
Mark 3 55.012 to less than 55.018 mm (2.1658 to less than 2.1661 in.)
Mark 4 55.018 to less than 55.024 mm (2.1661 to less than 2.1663 in.)

Crankshaft crank pin diameter
Mark 1 51.994 to less than 52.000 mm (2.0470 to less than 2.0472 in.)
Mark 2 51.988 to less than 51.994 mm (2.0468 to less than 2.0470 in.)
Mark 3 51.982 to less than 51.988 mm (2.0465 to less than 2.0468 in.)

Standard sized bearing center wall thickness
Mark 2 1.487 to less than 1.490 mm (0.0585 to less than 0.0587 in.)
Mark 3 1.490 to less than 1.493 mm (0.0587 to less than 0.0588 in.)
Mark 4 1.493 to less than 1.496 mm (0.0588 to less than 0.0589 in.)
Mark 5 1.496 to less than 1.499 mm (0.0589 to less than 0.0590 in.)
Mark 6 1.499 to less than 1.502 mm (0.0590 to less than 0.0591 in.)
Mark 7 1.502 to less than 1.505 mm (0.0591 to less than 0.0593 in.)

Connecting Rod Bolt
Standard 7.200 to 7.300 mm (0.283 to 0.287 in.)
Minimum 7.00 mm (0.276 in.)