Theft Deterrent System

THEFT DETERRENT SYSTEM:

TERMINALS OF ECU

1. CHECK MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)





(a) Disconnect the DA, DB, DD and J4 ECU connectors.
(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Reconnect the ECU connectors.
(d) Measure the voltage according to the value(s) in the table below.





HINT: *: w/ Glass Breakage Sensor

If the result is not as specified, there may be a malfunction on the wire harness side, or the glass breakage sensor ECU may have a malfunction.