Removal

3UR-FE ENGINE MECHANICAL: DRIVE BELT:

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY (Removal)

2. REMOVE NO. 1 ENGINE UNDER COVER (Replacement)

3. REMOVE FAN AND GENERATOR V BELT





(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and then insert a bar of dia 5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.

HINT: The pulley bolt for the belt tensioner has a left-hand thread.

(b) Remove the V belt.