Removal

3UR-FE ENGINE CONTROL SYSTEM: HEATED OXYGEN SENSOR:

REMOVAL

CAUTION:
- The procedures should be performed by at least 2 people.
- Wear protective gloves when removing the exhaust pipe.
- The exhaust pipe is extremely hot immediately after the engine has stopped.
- Confirm that the exhaust pipe has cooled down before removing it.

1. REMOVE PROPELLER SHAFT HEAT INSULATOR (for 4WD) (Removal)

2. REMOVE FRONT PROPELLER SHAFT ASSEMBLY (for 4WD) ()

3. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (except Regular Cab Standard Deck) (Removal)

4. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY (for Regular Cab Standard Deck) (Removal)

5. REMOVE FRONT EXHAUST PIPE ASSEMBLY (Removal)

6. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2)





(a) Using SST, remove the sensor.
SST: 09224-00010
7. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2)





(a) Using SST, remove the sensor.
SST: 09224-00010