Navigation System (for CrewMax)
NAVIGATION: NAVIGATION SYSTEM (for CrewMax): 5C-40: Camera Picture Error
DTC 5C-40 - Camera Picture Error
DESCRIPTION
WIRING DIAGRAM
INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs Navigation System (for CrewMax).
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - TELEVISION CAMERA)
(a) Disconnect the K7 receiver connector.
(b) Disconnect the X1 camera connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK NAVIGATION RECEIVER (CA+ VOLTAGE)
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
C -- REPLACE NAVIGATION RECEIVER
B -- REPLACE NAVIGATION RECEIVER
A -- REPLACE TELEVISION CAMERA ASSEMBLY