Navigation System (for Double Cab)

NAVIGATION: NAVIGATION SYSTEM (for Double Cab): 5C-40: Camera Picture Error

DTC 5C-40 - Camera Picture Error

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs (Navigation System (for Double Cab)).

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER - TELEVISION CAMERA)





(a) Disconnect the K7 receiver connector.
(b) Disconnect the X1 camera connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
2. CHECK NAVIGATION RECEIVER (CA+ VOLTAGE)





(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:









C -- REPLACE NAVIGATION RECEIVER
B -- REPLACE NAVIGATION RECEIVER
A -- REPLACE TELEVISION CAMERA ASSEMBLY