Intuitive Parking Assist System

PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM:

HOW TO PROCEED WITH TROUBLESHOOTING

HINT: Use these procedures to troubleshoot the intuitive parking assist system.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. INSPECT BATTERY VOLTAGE
Standard voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding.
NEXT -- Continue to next step.
3. PROBLEM SYMPTOMS TABLE

Result





B -- Go to step 5
A -- Continue to next step.
4. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Operation check (Operation Check).
(b) Terminals of ECU (Intuitive Parking Assist System).
NEXT -- Continue to next step.
5. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
6. CONFIRMATION TEST
NEXT -- END