Rear View Monitor System

PARK ASSIST / MONITORING: REAR VIEW MONITOR SYSTEM:

HOW TO PROCEED WITH TROUBLESHOOTING

HINT: Use these procedures to troubleshoot the rear view monitor system.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
NEXT -- Continue to next step.
3. CHECK DTC OF NAVIGATION SYSTEM
(a) Refer to the DTC check/clear procedures of the navigation system (Navigation System (for Double Cab)).

Result





B -- GO TO NAVIGATION SYSTEM
A -- Continue to next step.
4. PROBLEM SYMPTOM CONFIRMATION

Result





B -- Go to step 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
NEXT -- Continue to next step.
6. CHECK IF SAME SYMPTOM APPEARS IN NAVIGATION SYSTEM
(a) Refer to the navigation system (Problem Symptoms Table).

Result





B -- FOLLOW THE NAVIGATION SYMPTOM CHART TO PERFORM TROUBLESHOOTING
A -- Continue to next step.
7. PROBLEM SYMPTOMS TABLE
(a) Refer to the problem symptoms table (Rear View Monitor System).

Result





B -- Go to step 9
A -- Continue to next step.
8. BASED ON MALFUNCTION SYMPTOM, PERFORM TROUBLESHOOTING BELOW
(a) Terminals of ECU (Rear View Monitor System).
NEXT -- Continue to next step.
9. ADJUST, REPAIR OR REPLACE
NEXT -- Continue to next step.
10. CONFIRMATION TEST
NEXT -- END