Meter / Gauge System

METER: METER / GAUGE SYSTEM:

SYSTEM DIAGRAM









Communication table:





HINT: *1: for 4WD

*2: for U.S.A.

*3: except U.S.A.

SYSTEM DESCRIPTION

1. METER GAUGE AND WARNING/INDICATOR

Meter/Gauge:





HINT: *1: w/ Tachometer

*2: w/ Engine Coolant Temperature Gauge

*3: w/ Oil Pressure Receiver Gauge

*4: w/ Voltmeter

Warning/Indicator:













HINT: *1: for 4WD

*2: for U.S.A.

*3: except U.S.A.

*4: w/ Curtain Shield Airbag

*5: w/ Multi-information Display

*6: for 3UR-FE

2. MULTI-INFORMATION DISPLAY (w/ Multi-information display)
When the INFO switch is pressed, the multi-information display is changed between the following: cruise information display, warning display.
(a) Cruise information display:
The cruise information is displayed in the following order each time the INFO switch is pressed.









(b) Warning display:
When a warning is necessary, the warning display interrupts the multi-information display.

- The master warning light may illuminate or blink and buzzer may sound depending on the item in the multi-information display.









3. ACCESSORY METER
(a) This system has the following functions.
(1) Clock:
When the ignition switch is turned ON or ACC, the clock display is ON.
(2) Cruise Information:
For cruise information, four type of information (Outside temperature, average fuel economy, instant fuel economy, and distance to empty) can be displayed.
- The cruise information units can be changed by using the SETUP switch.

- Outside temperature -> Average fuel economy -> Instant fuel economy -> Distance to empty.





(3) Security Indicator Light:

- informs the driver of the theft deterrent system status.
- Depending on operation of the transponder key ECU, the interior security indicator light comes on or starts blinking.

(4) Clearance Warning Indicator:

- Displays the location of the obstacle and the approximate distance between the vehicle and the obstacle.
- Turns on and off according to the intuitive parking assist system status.
- Emits an intermittent sound to inform the driver that the ECU has detected an obstacle within the prescribed ranges.