Removal

LIGHTING: FOG LIGHT ASSEMBLY:

REMOVAL

HINT:
- Use the same procedures for the RH and LH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
2. REMOVE FOG LIGHT ASSEMBLY LH





(a) for Steel Type Bumper:
(1) Disconnect the connector.
(2) Push the tabs on the grommet.
(3) Detach the 2 claws and remove the fog light.





(b) for Resin Type Bumper:
(1) Disconnect the connector.
(2) Push the tabs on the aiming screw.
(3) Detach the 2 claws and remove the fog light.