ECM Communication Stop Mode

CAN COMMUNICATION: CAN COMMUNICATION SYSTEM: ECM Communication Stop Mode

ECM Communication Stop Mode

DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

HINT: Operating the ignition switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes resistance variation.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (ECM - BATTERY AND BODY GROUND)

(a) Disconnect the A24 and D74 ECM connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:

Result

D -- REPAIR OR REPLACE HARNESS OR CONNECTOR
C -- REPLACE ECM
B -- REPLACE ECM
A -- REPLACE ECM