Variable Valve Timing Actuator Position Sensor: Testing and Inspection

2UZ-FE ENGINE CONTROL SYSTEM: VVT SENSOR:

INSPECTION

1. INSPECT VVT SENSOR





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





NOTE: In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

If the resistance is not as specified, replace the sensor.