Installation

2UZ-FE ENGINE CONTROL SYSTEM: VVT SENSOR:

INSTALLATION

1. INSTALL VVT SENSOR





(a) Install the 2 sensors with the 2 bolt.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
(b) Connect the 2 sensor connectors.
2. INSTALL INTAKE MANIFOLD ASSEMBLY
(a) Install the intake manifold (Installation).
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).