Installation

LIGHTING: STOP LIGHT SWITCH:

INSTALLATION

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER

(a) Attach the 2 claws to install the adjuster.
2. INSTALL STOP LIGHT SWITCH ASSEMBLY

(a) Insert the stop light switch so that it contacts the pedal cushion.

NOTE: insert the stop light switch with a force of less than 98 Nm (1000 kgf-cm 72.3 ft.-lbf).

(b) Rotate the stop light switch clockwise 90° to install it to the adjuster.
Standard:
A: 1.5 to 2.5 mm (0.0591 to 0.0984 in.)

- When the stop light switch is rotated clockwise, make sure the stop light switch moves outward less than 1 pitch (pitch: distance between 2 screw threads).
- Rotate the stop light switch with a torque of 1.5 Nm (15 kgf-cm. 13 in.-lbf).
- Do not allow silicon grease to contact the stop light switch.