Installation

LIGHTING: HEADLIGHT DIMMER SWITCH:

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Insert the headlight dimmer switch assembly onto the steering column while making sure that the switch's protrusions align with the shaft's cutout parts.





(b) While loosening the band clamp, attach the claw to install the headlight dimmer switch assembly.
(c) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY





(a) Attach the claw to install the windshield wiper switch.
(b) Connect the connectors.
3. INSTALL SPIRAL CABLE SUB-ASSEMBLY (Installation)

4. INSTALL TILT AND TELESCOPIC MANUAL SWITCH (for Power Tilt and Power Telescopic Steering Column) (Installation)

5. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt) (Installation)

6. INSTALL UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) (Installation)

7. INSTALL UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) (Installation)

8. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt) (Installation)

9. INSTALL LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) (Installation)

10. INSTALL LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) (Installation)

11. INSTALL STEERING WHEEL ASSEMBLY (Installation)

12. INSTALL STEERING PAD (w/ Steering Pad Switch) (Installation)

13. INSTALL STEERING PAD (w/o Steering Pad Switch) (Installation)

14. INSTALL LOWER NO. 3 STEERING WHEEL COVER (Installation)

15. INSTALL LOWER NO. 2 STEERING WHEEL COVER (Installation)

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTE: Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).

17. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light (Diagnosis System).