Removal

A750F AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH:

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.





2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a) Remove the nut and disconnect the cable.
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the switch connector.





(b) Remove the nut, spring washer and transmission control shaft lever RH.





(c) Using a screwdriver, bend the tabs of the lock washer.





(d) Remove the lock nut and lock washer.





(e) Remove the bolt and switch.