Oil Pan, Engine

NO. 1 OIL PAN SUB-ASSEMBLY

NOTE:
- Install the oil pan within 3 minutes and tighten the bolts within 15 minutes after applying seal packing.
- Be careful not to drop any oil on the contact surfaces of the oil pan and cylinder block.
- Do not expose the seal to engine oil for at least an hour after installing it.





Temporarily install the No. 1 oil pan with the 19 bolts, stud bolt and 2 nuts.

Bolt length:





NOTE: Make sure the rear ends of the No. 1 oil pan and cylinder block are aligned. If not, the oil pan may become damaged.

Uniformly tighten the bolts and nuts in several passes.
For bolt A, D, E - Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
For bolt B, C, nut - Torque: 28 Nm (286 kgf-cm, 21 ft-lbf)

NO. 2 OIL PAN SUB-ASSEMBLY

NOTE:
- Install the oil pan within 3 minutes and tighten the bolts within 15 minutes after applying seal packing.
- Be careful not to drop any oil on the contact surfaces of the No. 1 oil pan and No. 2 oil pan.
- Do not expose the seal to engine oil for at least an hour after installing it.





Install the No. 2 oil pan with the 8 bolts and 2 nuts. Uniformly tighten the bolts and nuts in several passes.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)