Removal

DIFFERENTIAL: FRONT DIFFERENTIAL CARRIER ASSEMBLY (for 4WD): REMOVAL

REMOVAL

1. REMOVE FRONT WHEELS
2. REMOVE NO. 1 ENGINE UNDER COVER
3. DRAIN DIFFERENTIAL OIL (Fluid - Differential)
4. REMOVE FRONT PROPELLER SHAFT ASSEMBLY
(a) Remove the front propeller shaft (Service and Repair).
5. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
(a) Remove the front drive shaft Removal.
6. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
HINT: Use the same procedure as the LH side.

7. REMOVE FRONT DIFFERENTIAL CARRIER ASSEMBLY






(a) Remove the bolt and disconnect the front differential breather tube bracket.
(b) Disconnect the automatic disconnecting differential actuator hose.
(c) Disconnect the automatic disconnecting differential actuator connector.
(d) Support the front differential with a jack.
(e) Remove the A, B, C, D and E bolts.
(f) Slowly lower the jack, and remove the front differential carrier.
(g) Remove the F and G bolts, and differential support.