Navigation System (for Double Cab)

NAVIGATION: NAVIGATION SYSTEM (for Double Cab): 58-43: SPD Signal Error

DTC 58-43 - SPD Signal Error

DTC 80-43 - SPD Signal Error

DESCRIPTION





INSPECTION PROCEDURE

HINT: After the inspection is completed, clear the DTCs (Navigation System (for Double Cab)).

PROCEDURE

1. CHECK VEHICLE SENSOR (NAVIGATION CHECK MODE)





(a) Enter the "Navigation Check" mode (Vehicle Sensors) (Navigation Check Mode).
(b) While driving the vehicle, compare the "SPD" indicator to the reading on the speedometer. Check if these readings are almost equal.
OK:
The readings are almost equal.

Result





C -- GO TO "SPEED SIGNAL DOES NOT CHANGE IN THE NAVIGATION CHECK MODE" IN PROBLEM SYMPTOMS TABLE
B -- REPLACE NAVIGATION RECEIVER
A -- REPLACE NAVIGATION RECEIVER