Pinout Values and Diagnostic Parameters

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM:

TERMINALS OF ECU

1. CHECK MAIN BODY ECU (DRIVER SIDE JUNCTION BLOCK)





(a) Disconnect the DD and DB ECU connectors.
(b) Measure the resistance and voltage according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction in the wire harness side.
(c) Reconnect the DD and DB ECU connectors.
(d) Measure the voltage and resistance according to the value(s) in the table below.









HINT:
- *1: for Double Cab
- *2: for CrewMax

If the result is not as specified, the main body ECU may have a malfunction.