Installation

MIRROR: OUTER REAR VIEW MIRROR:

INSTALLATION

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY
(a) Temporarily install the mirror by inserting the claw on the mirror into the holes on the vehicle.
(b) Tighten the 3 nuts in the sequence shown in the illustration and install the mirror.
Torque: 7.8 Nm (80 kgf-cm, 69 in-lbf)
(c) w/ Power mirror control system:
Connect the connector labeled A.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (Reassembly)

3. INSTALL COURTESY LIGHT ASSEMBLY (w/ Power Window) (Reassembly)

4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (Reassembly)

5. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) (Reassembly)

6. INSTALL FRONT ARMREST UPPER BASE PANEL (w/ Power Window) (Reassembly)

7. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (Reassembly)