Removal

3UR-FE FUEL PUMP:

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE (Removal)

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
- Some systems need to be initialized after the cable is reconnected (Repair Instruction - Initialization).
- After the ignition switch is turned OFF, the navigation system requires approximately 90 seconds to record various types of memory and settings. As a result, after turning the ignition switch OFF, wait 90 seconds or more before disconnecting the cable from the negative (-) battery terminal.

3. REMOVE FUEL TANK CAP
4. REMOVE NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for Rough Road Area Specification Vehicles) (Removal)

5. DISCONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY (Removal)

6. DISCONNECT FUEL TANK RETURN TUBE (Removal)

7. DISCONNECT VENT LINE HOSE (Removal)

8. DISCONNECT WIRE HARNESS (Removal)

9. DISCONNECT FUEL TANK TO FILLER PIPE HOSE (Removal)

10. DISCONNECT OUTLET NO. 1 CANISTER HOSE (Removal)

11. REMOVE FUEL TANK ASSEMBLY (Removal)

12. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (Removal)