Compressor Clutch

MAGNET CLUTCH CLEARANCE
Standard clearance 0.35 to 0.60 mm (0.014 to 0.024 in.)

If the measured value is not within the standard clearance, remove the magnet clutch hub and adjust the clearance using compressor washers to obtain the standard clearance.

Compressor washer thickness:
- 0.1 mm (0.004 in.)
- 0.3 mm (0.012 in.)
- 0.5 mm (0.020 in.)

NOTE: Adjustment should be performed with 3 or fewer magnet clutch washers.