Canada - Interior - Drivers Side Air Vents Loose

Bulletin
TSB2991

Issue Date
May 2, 2008

Market
Canada

Title
Driver's Side Air Vents Loose

Component
BODY

Models
'07-'08 Tundra

INTRODUCTION:

Some 2007 and 2008 model year Tundra vehicles may exhibit a loss of tension of the driver's side HVAC dash vents. The loss of tension will allow the vents to "fall down" and not stay in the position set by the customer.






APPLICABLE VEHICLES:






PARTS INFORMATION:






WARRANTY:






PRODUCTION CHANCE INFORMATION:

REPAIR PROCEDURE:







1. Remove the instrument cluster finish panel assembly.
A. Detach the 4 claws.
B. For Column Shift Type: Move the shift lever to the S position.







C. Detach the 12 clips.







D. Disconnect the connectors and clamps.
E. Remove the wire harness from the slots, and then remove the finish panel.







2. Remove both register assemblies from the finish panel assembly by releasing the 4 clips (2 on each side) and install the new parts.
3. Re-assemble in reverse order.
4. Verify vents have tension and stay in place.

NOTE:
Issue of this Technical Service Bulletin is to ensure that proper repair information is available. IT DOES NOT CONSTITUTE AN AUTHORIZATION FOR REPAIR. Normal provisions of the formal warranty policy, as applicable, will apply.