Back Window Glass (for CrewMax)

WINDSHIELD / WINDOWGLASS: BACK WINDOW GLASS (for CrewMax): INSPECTION

INSPECTION





1. INSPECT BACK DOOR POWER WINDOW REGULATOR MOTOR
(a) Inspect the operation of the power window regulator motor.
(1) Check that the motor operates smoothly when battery voltage is applied to terminals 1 and 2 as follows.
OK:






If the result is not as specified, replace the motor.
2. INSPECT NO. 1 BACK POWER WINDOW RELAY (BACK P/W NO. 1 RELAY)
(a) Remove the power window relay from the engine room relay block.






(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the relay.
3. REMOVE NO. 2 BACK POWER WINDOW RELAY (BACK P/W NO. 2 RELAY)
(a) Remove the power window relay from the engine room relay block.






(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, replace the relay.