Trunk / Liftgate Interior Trim Panel: Service and Repair

Trim Panel Removal and Installation

DISASSEMBLY

HINT: A bolt without a torque specification is shown in the standard bolt chart Removal.

1. REMOVE BACK DOOR TRIM BOARD





(a) Remove the assist strap hole cover.
(b) Remove the screw and assist strap.
(c) Using a screwdriver, remove the back door trim cover.

HINT:
Tape the screwdriver tip before use.
In order to prevent the back door from being damaged, cover the parts indicated by arrow marks in the illustration with tape.

(d) Using a clip remover, remove the 10 clips and trim board.
(e) Remove the inner weatherstrip.

Reassembly is the reverse of Disassembly