Sliding Roof Housing

SLIDING ROOF: SLIDING ROOF HOUSING: INSPECTION

INSPECTION

1. INSPECT SLIDING ROOF MOTOR SWITCH ASSEMBLY





(a) Remove the sliding roof motor switch Removal.
(b) Check the continuity between the terminals when operating the switch.
Standard resistance:





If the result is not as specified, replace the switch.
2. INSPECT HARNESS AND CONNECTOR (FOR SLIDING ROOF MOTOR ASSEMBLY)





(a) Disconnect the sliding roof motor connector Removal.
(b) Check the connector terminals of the wire harness side connector.
Standard:





If the result is not as specified, there may be a malfunction on the wire harness side.