Installation

SEAT: FRONT SEAT ASSEMBLY (for Power Seat): INSTALLATION

INSTALLATION

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL FRONT SEAT ASSEMBLY LH
(a) Place the front seat assembly LH in the cabin.

NOTE: Be careful not to damage the body.

(b) Connect the connectors under the front seat assembly LH.
(c) Install the front seat assembly LH with the 4 bolts.
Torque: 37 Nm (375 kgf-cm, 27 ft-lbf)
2. INSTALL SEAT TRACK OUTER COVER RH
3. INSTALL SEAT TRACK OUTER COVER LH
4. INSTALL SEAT TRACK BRACKET COVER INNER LH
5. INSTALL SEAT TRACK BRACKET COVER OUTER FRONT LH
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.
8. INSPECT FRONT SEAT ASSEMBLY Front Power Seat Control System (w/o Memory)