Disassembly
SEAT: REAR NO. 1 SEAT ASSEMBLY: DISASSEMBLY
DISASSEMBLY
1. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH
(a) Remove the bolt and seatback hinge.
2. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH
(a) Remove the bolt and seatback hinge.
3. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY CENTER
(a) Remove the 2 bolts and seatback hinge.
4. REMOVE REAR SEAT LOCK STRIKER SUB-ASSEMBLY
(a) Remove the 6 bolts and 2 lock strikers.
5. REMOVE REAR SEAT ARMREST ASSEMBLY CENTER
(a) Remove the screw and armrest cover.
(b) Remove the bolt and armrest.
6. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY
(a) Open the fastener.
(b) Roll up the center armrest cover to the position shown in the illustration and remove the 3 screws.
(c) Remove the cup holder.
7. REMOVE REAR SEATBACK LOCK COVER LH
(a) Remove the screw and seatback lock cover.
8. REMOVE REAR SEATBACK LOCK COVER RH
(a) Remove the screw and seatback lock cover.
9. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH
(a) Using a screwdriver, detach the 2 claws and remove the stop button grommet.
HINT: Tape the screwdriver tip before use.
(b) Remove the 2 headrest supports.
(c) Remove the hog rings and seatback cover together with the pad from the seatback frame.
(d) Remove the hog rings and seatback cover from the seatback pad.
10. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH
(a) Using a screwdriver, detach the 2 claws and remove the stop button grommet.
HINT: Tape the screwdriver tip before use.
(b) Using a screwdriver, detach the 2 claws and remove the anchor cover cap.
HINT: Tape the screwdriver tip before use.
(c) Using a screwdriver, detach the 4 claws and remove the shoulder belt cover.
HINT: Tape the screwdriver tip before use.
(d) Remove the 4 headrest supports.
(e) Remove the hog rings and seatback cover together with the pad from the seatback frame.
(f) Remove the hog rings and seatback cover from the seatback pad.
11. REMOVE REAR SEATBACK LOCK ASSEMBLY LH
(a) Remove the seatback lock release button.
(b) Remove the 2 bolts and seatback lock.
12. REMOVE REAR SEATBACK LOCK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.
13. REMOVE REAR SEAT BELT ASSEMBLY OUTER CENTER
(a) Remove the nut and belt assembly.
14. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY LH
(a) Remove the 2 bolts and 2 hinge sub-assemblies.
15. REMOVE REAR NO. 1 SEAT HINGE SUB-ASSEMBLY RH
(a) Remove the 2 bolts and 2 hinge sub-assemblies.
16. REMOVE REAR SEAT CUSHION UNDER COVER LH
(a) Detach the cushion cover hook.
(b) Remove the cushion cover together with the pad.
(c) Remove the 5 clips and cushion under cover.
17. REMOVE REAR SEAT CUSHION UNDER COVER RH
(a) Detach the cushion cover hook.
(b) Remove the cushion cover together with the pad.
(c) Remove the 7 clips and cushion under cover.
18. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH
(a) Remove the hog rings and cushion cover from the cushion pad.
19. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH
(a) Remove the hog rings and cushion cover from the cushion pad.