Operation CHARM: Car repair manuals for everyone.

Installation








SEAT: REAR NO. 1 SEAT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY LH
(a) Install the seatback with the 2 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
2. INSTALL REAR SEATBACK ASSEMBLY RH
(a) Install the seatback with the 2 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
(b) Install the floor anchor for the rear seat belt outer center with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
3. INSTALL REAR SEAT CUSHION ASSEMBLY LH
(a) Install the cushion with the 2 bolts.
Torque: 37 Nm (377 kgf-cm, 27 ft-lbf)
(b) Install the 2 hinge covers.
4. INSTALL REAR SEAT CUSHION ASSEMBLY RH

HINT: Use the same procedures described for the LH side.