Data List / Active Test

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: DATA LIST / ACTIVE TEST

DATA LIST / ACTIVE TEST

1. DATA LIST

HINT: While the Techstream is connected to the DLC3 with the ignition switch ON, the ABS, TRAC and VSC data list can be displayed. Follow the prompts on the screen to access the "Data List".

ABS/VSC/TRAC

















2. ACTIVE TEST

HINT:
Performing the Active Test using Techstream allows relays, actuators, etc. to operate without removing any parts. Performing the Active Test as the first step of troubleshooting is one of the methods to save time.
It is possible to display the Data List during the Active Test.

(a) Connect Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) According to the display on the tester, perform the "Active Test".

HINT: The ignition switch must be turned to ON to proceed to the Active Test using Techstream.

ABS/VSC/TRAC