Programming and Relearning

METER: METER / GAUGE SYSTEM: CUSTOMIZE PARAMETERS

CUSTOMIZE PARAMETERS

1. SEAT BELT WARNING BUZZER CANCEL SETTING
(a) Turn the ignition switch ON, and set the display window to ODO.
(b) Turn the ignition switch OFF then ON, and then within 6 seconds, press and hold the ODO/TRIP switch for 10 seconds or more.
(c) Perform one of the following operations to select the buzzer pattern to be set.









(d) When one of the buckle switch operations above is performed, the ODO/TRIP display will change to "b-on" or "b-off", and the system will enter cancel mode.

HINT: If the ODO/TRIP switch is not pressed for 10 seconds or more the normal display will return.

(e) Press the ODO/TRIP switch to select the buzzer ON setting "b-on" or buzzer cancel setting "b-off".
(f) After selecting the setting, do not press the ODO/TRIP switch for 10 seconds or more, or turn the ignition switch OFF to exit cancel mode and save the settings.

HINT: After disconnecting and reconnecting the negative (-) battery cable, the driver seat and passenger seat buzzer will be set to ON.