Operation Check

LIGHTING: LIGHTING SYSTEM: OPERATION CHECK

OPERATION CHECK

1. ILLUMINATED ENTRY SYSTEM OPERATION CHECK
(a) The light that is lit in the illuminated entry system is explained below:
(b) Turn the ignition switch to OFF, close all the doors, and set the driver's door in the lock condition.
(c) Unlock the door and open any other door, and check that the room light comes on. Close the door, and check that the room light goes off within 15 seconds.
(d) Turn the ignition switch to ON, and open and close any other door. Check that the room light immediately goes off.
(e) Turn the ignition switch to OFF.
(f) Open and close any door to light the room light. Before the room light goes off within 15 seconds, turn the ignition switch to ON, and check that the room light goes off immediately.
(g) Turn the ignition switch OFF.
(h) Open and close any door to light the room light. Before the light goes off within 15 seconds, lock the driver door. Check that the light goes off immediately.
2. DOME RELAY CUT OPERATION CHECK
(a) Remove the ignition key and close all doors.
(b) Open the driver door to light the room light, and leave it as opened. Check that the light goes off in about 30 min.
(c) After the room light goes off, close the driver's door.
(d) Open any door except the driver's door to turn the room light on, and then open the driver's door. Check that room light goes off within 30 min. after opening the driver's door.
(e) Close all the doors. With the ignition key inserted, open any door to light the room light, and then, remove the ignition key. Check that the room light goes off within 30 min.
(f) One of the room light switches is on and close all doors.
(g) Lock all doors, and check that the room light goes off within 3 sec.
3. SIDE STEP LIGHT OPERATION CHECK
(a) Turn the ignition switch to OFF, close all the doors, and set the driver door in the lock condition.
(b) Unlock the door and open front or rear doors, and check that the side step light comes on. Close the door and check that the side step light goes off within 15 seconds.
(c) Under the conditions that the ignition switch is ON, one of the front or rear doors opens and the shift range is at any positions except for P positions, check that the side step light goes off when the vehicle speed exceeds 8 km/h (4.8 mph).
(d) Then, check that the side step light comes on when the vehicle speed become 4 km/h (2.4 mph) or less.
4. LIGHT AUTO CUT OPERATION CHECK
(a) Turn the ignition switch to ON, and turn the headlight switch to TAIL or HEAD.
(b) Turn the ignition switch to OFF, and open and close the driver's door, check the headlight goes off within 30 sec.