Programming and Relearning

LIGHTING: LIGHTING SYSTEM: CUSTOMIZE PARAMETERS

CUSTOMIZE PARAMETERS

1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)

NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first male sure that the function is set to the default setting.

(a) Turn the ignition switch LOCK.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch ON.
(d) Turn the tester on.
(e) Enter the following menus:
(1) Select: Customize Setting.
(f) Select the setting by referring to the table below.

Illuminated Entry





Light Control





HINT: The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

Illustration*1