Reading and Clearing Diagnostic Trouble Codes

LIGHTING: LIGHTING SYSTEM: DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Enter the following menus:
(1) Select: Body Electrical / (desired system) / Trouble Codes /
(e) Read the DTCs.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch ON.
(c) Turn the tester on.
(d) Erase the following menus:
(1) Select: Body Electrical / (desired system) / Trouble Codes /
(e) Erase the DTCs.