Reassembly

1GR-FE FUEL: FUEL PUMP: REASSEMBLY

REASSEMBLY

1. INSTALL FUEL PUMP FILTER
(a) Install the fuel pump filter with a new clip.
2. INSTALL FUEL PUMP ASSEMBLY WITH FILTER





(a) Install a fuel pump spacer to the fuel pump.
(b) Apply a light coat of gasoline to a new O-ring, and install it to the fuel pump.
(c) Apply a light coat of gasoline to the O-ring again, and install the fuel pump to the fuel filter.





(d) Install the sub tank.
(1) Apply a light coat of gasoline to a new O-ring, and install it to the fuel suction tube assembly.
(2) Apply a light coat of gasoline to the O-ring again, and install the sub tank to the fuel filter.
3. INSTALL FUEL SENDER GAGE ASSEMBLY





(a) Lock the fuel sender gage.
(b) Connect the fuel sender gage connector.
4. INSTALL VAPOR PRESSURE SENSOR





(a) Install the vapor pressure sensor with the tube joint clip.

NOTICE:
- Check that there is no scratch or foreign objects on the connecting parts.
- Check that the fuel tube joint connector is fully inserted.
- Check that the tube joint clip is on the collar of the fuel tub joint.
- After installing the tube joint clip, check if the fuel tube joint connector is securely connected by pulling it.