Installation

1GR-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION

INSTALLATION

1. INSTALL ECM





(a) Install the ECM bracket No. 2 with the 2 screws to the ECM.
(b) Install the ECM bracket No. 1 with the 2 screws to the ECM.
(c) Install the ECM with the 3 nuts.
Torque: 13 Nm (133 kgf-cm, 10 ft-lbf)
(d) Connect the 5 ECM connectors to the ECM.
2. INSTALL INSTRUMENT PANEL FINISH PANEL LOWER NO.2
3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY
4. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO. 2