Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Attach the 2 claws to install the steering angle sensor.





(b) Connect the steering angle sensor connector.
2. INSTALL TURN SIGNAL SWITCH ASSEMBLY Installation
3. INSPECT SPIRAL CABLE SUB-ASSEMBLY Testing and Inspection
4. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
5. INSTALL SPIRAL CABLE SUB-ASSEMBLY Installation
6. INSTALL STEERING COLUMN COVER UPPER Installation
7. INSTALL STEERING COLUMN COVER LOWER
8. INSTALL STEERING WHEEL ASSEMBLY Installation
9. INSTALL STEERING PAD ASSEMBLY Installation
10. INSTALL STEERING WHEEL COVER LOWER NO. 2
11. INSTALL STEERING WHEEL COVER LOWER NO. 3
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
13. INSPECT SRS WARNING LIGHT Installation
14. PERFORM STEERING ANGLE SENSOR ZERO POINT CALIBRATION

HINT: Perform steering angle sensor zero point calibration Programming and Relearning.

15. CHECK SPEED SENSOR SIGNAL

HINT: Check the speed sensor signal Test Mode Procedure.