Removal

BRAKE CONTROL: STEERING ANGLE SENSOR: REMOVAL

REMOVAL

1. PRECAUTION Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
4. REMOVE STEERING WHEEL COVER LOWER NO. 3
5. REMOVE STEERING WHEEL COVER LOWER NO. 2
6. REMOVE STEERING PAD ASSEMBLY Removal
7. REMOVE STEERING WHEEL ASSEMBLY Removal
8. REMOVE STEERING COLUMN COVER LOWER Removal
9. REMOVE STEERING COLUMN COVER UPPER
10. REMOVE SPIRAL CABLE SUB-ASSEMBLY Removal
11. REMOVE TURN SIGNAL SWITCH ASSEMBLY Removal
12. REMOVE STEERING ANGLE SENSOR





(a) Disconnect the steering angle sensor connector.





(b) Detach the 2 claws, then remove the steering angle sensor.