Removal

BRAKE CONTROL: FRONT SPEED SENSOR: REMOVAL

REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL
2. REMOVE FRONT SPEED SENSOR LH





(a) Disconnect the front speed sensor connector.





(b) Using a hexagon wrench (5 mm), remove the bolt and front speed sensor from the steering knuckle.
SST: 99999-60011

NOTICE:
- Do not allow dirt and foreign matter to adhere to the sensor tip.
- Do not allow dirt and foreign matter into the sensor installation hole.