Installation

LIGHTING: STOP LIGHT SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
(a) Install a new stop light switch mounting adjuster to the pedal support.
2. INSTALL STOP LIGHT SWITCH ASSEMBLY





(a) Install the stop light switch to the adjuster until it slightly touches the brake pedal.
NOTE: Do not depress the brake pedal.





(b) Turn the stop light switch a quarter-turn clockwise to install it.

NOTE: Do not depress the brake pedal.

Torque: 1.5 Nm (15 kgf-cm, 13 in-lbf)
(c) Check the stop light switch clearance.
Stop light switch clearance:
1.5 to 2.5 mm (0.0590 to 0.0984 in.)
(d) Connect the wire harness clamp to the pedal support.
(e) Connect the connector to the stop light switch.