Removal

1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

REMOVAL

1. REMOVE GENERATOR ASSEMBLY Removal
2. REMOVE ENGINE UNDER COVER ASSEMBLY REAR
(a) Remove the 4 bolts and the engine under cover assembly rear.
3. SEPARATE COOLER COMPRESSOR ASSEMBLY





(a) Remove the bolt and separate the suction hose sub-assembly.
(b) Disconnect the cooler compressor assembly connector.
(c) Remove the 4 bolts and separate cooler compressor assembly from the V-ribbed belt tensioner assembly.
4. REMOVE CRANKSHAFT POSITION SENSOR





(a) Disconnect the crankshaft position sensor connector.
(b) Remove the bolt and the crankshaft position sensor.